Site icon The Perfect Pack

Hill People Gear Umlindi V2: Review

Hill People Gear (HPG) is known for rugged, no-nonsense packs for backcountry users. Their designs are often stripped down and deliberately spartan to ensure they are tough and reliable in the harshest of conditions. They have a wide range of packs form light day packs to heavy haulers, but the one that seems to be the favorite for many users and their staff is the Umlindi.

A highly versatile design that will serve as a capable daypack or for lightweight overnights, the Umlindi was redesigned in 2020, with adjustments to increase comfort and improve access across the pack.

Tech Specs

Specifications taken from

Quality & Comfort

The Umlindi is not a standard daypack, in fact, it was designed as a sort of over-sized lumbar pack. As such, it is designed to be carried a bit differently than most might be used to. While it will function stand-alone on the shoulders, it is really best used with one of HPG’s excellent pack belts. HPG supplied this unit with their Prairie Belt.

The Prairie Belt is potentially over-padded for this application, but the design allows removal of part of the foam padding. I ran the belt with the lighter, thinner padding only and it seemed a good match to the 22 lb training load I used in the Umlindi.

To achieve optimal comfort with the Umlindi, the user should cinch down the waist belt first, then pull the delta straps down tight. Once these steps are complete, the pack should be supported fully on the belt and relatively stable. Finally, the user will drape the shoulder harness over their shoulders and tighten them only enough to add needed stability, but not enough to take any of the weight off the hips.

Once adjusted properly, I began to see why the Umlindi is a favorite. It carries very well and allows a lot of freedom of movement in the arms. It even allows for some ventilation around the back panel. I really was rather impressed to see how well a small pack like this could do sitting on a proper load-bearing belt.

HPG is manufactured in the United States by First Spear, a company known for high end construction and consistently turning out top-tier products. Overall, this sample lived up to that reputation with a couple minor gripes. Inside the front sleeve pocket there is a seam that was left unbound and the Cordura has begun to fray a bit. This is an easy fix with a lighter and should not be a long term issue, but I was surprised to see such an issue on this pack.

The second issue I noted was that the main zipper would drag going around the corners of the top flap. There is no doubt a lot of material contained under that double-stitched binding tape, but it is bulky and impedes the smooth passage of the zipper pull upon use. It functioned better when the pack was more fully loaded, but softening the radius of the top flap might be a worthwhile design change.

Organization & Access

As noted above, HPG deliberately aim to avoid potentially frail features seen on many other packs. As such, the Umlindi is a simple pack when it comes to organization.

The face of the pack has a single full height zipper pocket. This is accessible from the interior of the pack also (see photo below). There are also points on the corners of the bag to affix many of HPGs accessory pockets if more organization is needed.

The sides of the bag feature some of the burliest bottle pockets on the market. These will easily swallow a 1 litre bottle plus a cup and have no problem corralling a 1.5 litre bottle. They cinch up tight and are great for equipment as well. The sides also have the anchor points for a pair of compression straps that encircle the bag.

There is a flat zippered pocket atop the pack and an opening for a hydration hose. There are more anchor points for the included but not pictured top compression straps and a simple carry handle.

The bottom of the pack sports two more removable compression straps and on the front corner a point to attach tools such as an ice axe.

Looking down into the pack the user will note that the underside of the lid is lined in a loop material that will accept hook backed pouches. There is also a velcro strip that allows the user to access the exterior front pocket form inside the pack. The frame sheet and stays are visible here, as are the three hanging loops at the top of the pack used for suspending water bladders or panel organizers.

What’s Perfect

What’s Not

Wrap Up

Overall, I was really impressed with the Umlindi. It could become my go-to day pack and will see likely use for day-hunts later in the fall. Its bomber construction and the ability to scale it up and down really make it a versatile solution. I have no issue with quality imported packs, but it’s fantastic to see a really well done US-based and produced company going strong. I trust the QC issues I noted were isolated incidents and will not be present for other users.

If you’re looking for a no-frills, tough-as-nails backcountry day pack, the Umlindi is worth your consideration- I don’t think you’ll be disappointed.

Disclaimer: The Umlindi was provided by Hill People Gear for use in this review. The content of the review was not shared with Hill People Gear prior to publication. Our reviews are impartial and never altered to keep a brand happy.

Exit mobile version